Insurance Reinstatement Valuation

What is Reinstatement Valuation Insurance?

The typical home insurance you buy is not based on the current market value of your property. Instead, it’s based on the cost of doing what we call a “reinstatement valuation.” This is when an insurance company assesses what it would cost to put your property back in order.

You might be tempted to think the value is higher than it is, which could lead you to pay too much for insurance. Conversely, if you’re insuring your property for too low a value, you might not have enough coverage in the event of a disaster. An RICS surveyor does desktop work that enables him or her to arrive at a reliable figure.

The valuation should be done by a professional, someone who knows what it means to appraise your property for insurance purposes. Our panel of valuers are familiar with the most up-to-date methods and means to carry out the assessment properly for properties in Notting Hill, London, and nearby areas.

Benefits from Reinstatement Valuation

If you have an insurance reinstatement valuation carried out by a valuer registered with the RICS, you can know that:

  1. You are paying the right amount for your home insurance and are not overpaying or underpaying due to poor estimates in the past. Essentially, the insurance reinstatement valuation can remove the guesswork from determining what your home is worth in terms of insurance.

  2. There is a minimal risk of your home insurance being insufficient. The insurance reinstatement valuation provides a clear picture of the sorts of costs you may not have thought about that are involved in rebuilding your home.

  3. You are covered for a worst-case scenario without worrying that your policy will fall short. The insurance reinstatement valuation provides a basis to understand the sorts of costs that would have to be incurred to completely replace your home.

Cost of an Insurance Reinstatement Valuation in Notting Hill

When it comes to online estimates of the cost to rebuild your home, they’re generally not very reliable. While some may offer a degree of confidence that they are estimating correctly, in actuality, if you take a surveyor’s recommendation and use an online cost-estimator as a starting point, you could end up with an estimate that is far too high or far too low. The good news is that there’s a way to avoid that hazard: you can instruct an RICS-registered valuer to give you a rebuild estimate.

Problems with Shared Ownership Valuations

Even if shared ownership’s other perceived advantages make it an attractive option, its valuations aren’t without problems. One of these problems is that shared ownership properties are usually at a discount to the market price, and that discount isn’t always applied consistently or fairly.

Failure to achieve a fair and consistent discount price can create a situation that, in the long run, is disincentivizing to shared ownership because the avenue becomes less affordable.

Another matter is shared ownership’s special nature. This model is a partnership-type arrangement between the resident and the housing association, so it is bound to have its share of disagreements, especially over property valuation. Now, the housing association is likely to want the property it has shared ownership in to be valued as highly as possible, since that would maximize its return in the event of resale or staircase. You, on the other hand, might prefer as low a valuation as possible, since that would minimize your financial outlay.

Furthermore, shared ownership trusts might not increase in value at the same rate as those on the open market, due to resale and buyer eligibility caps, an important consideration for shared owners looking to cash in on property market growth.

Is Shared Ownership Valuation Needed?

If you plan to purchase a larger portion of your shared ownership home, you will need an accurate valuation from an RICS-accredited surveyor. The valuation is valid for 3 months. So, reach out to us and a member of the Notting Hill Valuation Surveyor team will conduct a Shared Ownership Valuation for you.

What’s included in a Full Building Survey?

The Full Building Survey report includes the following:

  • Inspection of accessible parts of the main building and any outbuildings.
  • Assessment of major and minor faults and implications.
  • Speculation on possible hidden defects.
  • Structural review of the property (including timber).
  • Checking all services (gas, electricity, hot water, heating, etc.).
  • Description of construction materials used (damp-proofing, drainage, and insulation).
  • Testing for dampness in the floors, ceilings, and perimeter walls.
  • Reported valuation of the property for insurance reinstatement or market purposes (optional).

Difference between Homebuyer Survey and Full Building Survey?

When it comes to the detail that the surveyor will go into concerning defects, repairs, and maintenance, the Homebuyer Survey is fairly standard. Full Building Surveys, however, are more refined and go into more detail about possible and likely defects. Repairs and maintenance are covered in more detail. The Survey cost depends on the age, size, and value of the property.

What will be inspected by the Building Surveyor?

The analysis they undertake is a visual inspection. This means that, for the most part, the building components that can be seen will be looked at and assessed in accordance with the surveyor’s remit. The Home Survey Report will show you the visible defects and then go on to discuss the kinds of partially hidden or totally hidden defects that the surveyor thinks you should be aware of. It will also try to clarify what kinds of repair work need to be done and the nature of the repairs. The survey is effectively a way to consider “defects” and their potential impact on the building.

What is in a Building Survey Report?

A Building Survey Report contains the most important information for understanding the condition of a property. The surveyors that undertake the work follow a set procedure. The first part of the report contains a general overview of the property and its surroundings. The second part details the major and minor problems with the property’s components, inside and out. These problems range from serious structural defects to issues with doors or windows that don’t close properly, and everything in between. The report is written in clear English, complemented by diagrams and photographs. If any of the problems found are what a surveyor might consider important, that’s what the report indicates—using clear and unambiguous language.

Condition Ratings in a Building Survey Report

Surveyors usually use a tick box to indicate methods of repair when drafting a building survey report. They are also required to comment on the timescale of any repairs. A condition rating is typically included: what needs to be addressed immediately, what is in the process of deteriorating but is in reasonable condition, and what has not deteriorated at all.

What Checks are carried out by a Building Surveyor?

A building surveyor is responsible for a variety of checks and tests during a building inspection. These could be checks or tests for damp and woodworm, or they could be visual inspections of the building’s structure. In building surveying, there are visual inspections of roofs – checking for tiles and slates (if applicable) and also checking for leadwork (if applicable) and looking at the junctions between roof and wall. If the wall structure has brick in it, the surveyor will visually check for any “spalling” (brick breaking apart visibly) and any bulging (brick failing to hold its place visibly), for example.

Recommendations of Repair in Building Surveys

If defects need fixing immediately, then the options recommended for this survey specify what to repair and give some idea of how long the problem has existed. For the most part, this survey describes recommended repair approaches that are standard in the industry and that do not require excessive expenditure. Future maintenance is also discussed, including what to expect when the problem being surveyed is not repaired and what to expect with repairs that are made but with questionable methodology.

Legal Information in Building Surveys

Your surveyor will explain some of the legal aspects of purchasing the building, covering—in as much or as little detail as you desire, and their implications, but this is subject to your solicitor verifying.

Valuations & Reinstatement Cost

You might consider having a separate market valuation done to determine whether the property’s asking price is warranted. You’ll also need a reinstatement cost valuation for insurance reasons.

Who requires a Building Survey?

RICS’s industry guidelines suggest building surveys for properties that are large, very old, in some disrepair, or have unusual features. Building surveys are also recommended if you plan to do any significant renovations or extensions.

Do You need a Home Buyer Survey?

If you’re purchasing a relatively modern home that’s in decent shape and built to ordinary standards, then a Home Buyer Survey is an acceptable choice. If you want the assurance of an inspection and report that are pretty much guaranteed to turn up any issues that might be hidden or just hard to see, then you should go for a Full Building Survey instead.

Home Buyer Survey v Full Building Survey

The Full Building Survey is more detailed; it is more specifically tailored to the property your surveyor would be inspecting. It also comes with more advice on the visible defects found and on the potential hidden defects that they suspect may be present. Your surveyor will illustrate reports with photographs so that you can clearly see what has been discovered. Both the Home Buyer and Full Building Surveys describe the repairs needed, the order in which the repairs should be done, and the kind of “maintenance measures” that will be required to keep the property in good condition.

Is a Valuation included in a Home Survey?

A HomeBuyer Report does include a market valuation as well as reinstatement costs. However, a Full Building Survey does not. The main reason for the differences in what is and isn’t included in the two types of reports is how focused the reports are on the condition of the property. The Full Building Survey is the most in-depth and comprehensive survey of a property that you can have done.

Time Needed for Probate Valuation

Instructions from Executors and solicitors are promptly processed by the RICS Valuers. Visits to the properties usually occur within 1-2 weeks and often even sooner. After the inspection, the valuation report is usually completed in 3-4 days. The copy—both for yourself and for tax purposes—will be delivered to you quickly by the surveyor.